Fox Factory Dropper Travel Change Guide

Introduction to Fox Factory Dropper Travel Change

The Fox Factory dropper post is a highly sought-after component in the mountain biking world, known for its reliability and performance. One of the key features that set it apart from other dropper posts on the market is its ability to adjust travel. This means that riders can customize the post to suit their specific needs, whether that’s to accommodate different riding styles or to fit different bike frames. In this guide, we will walk you through the process of changing the travel on your Fox Factory dropper post, including the tools you’ll need, the steps to follow, and some important notes to keep in mind.

Tools and Materials Needed

Before you start, make sure you have the following tools and materials: * Fox Factory dropper post * Travel adjustment spacers (available from Fox or other aftermarket suppliers) * allen wrench (3mm and 5mm) * Torx wrench (T25) * Clean rags * Grease (for lubricating moving parts)

Step-by-Step Instructions

To change the travel on your Fox Factory dropper post, follow these steps: * Step 1: Remove the Post from the Bike. Take the dropper post out of the frame to give yourself more room to work. This will also prevent any damage to the bike. * Step 2: Disassemble the Post. Use the allen wrench to remove the bolts that hold the post together. You’ll need to remove the saddle clamp and any other components that may be attached to the post. * Step 3: Locate the Travel Adjustment Mechanism. Inside the post, you’ll find the travel adjustment mechanism. This is where you’ll add or remove spacers to change the travel. * Step 4: Add or Remove Spacers. Use the travel adjustment spacers to increase or decrease the travel of the post. Make sure to follow the manufacturer’s instructions for the correct spacing and configuration. * Step 5: Reassemble the Post. Once you’ve made the necessary adjustments, reassemble the post in the reverse order that you disassembled it.

Tips and Tricks

Here are some additional tips and tricks to keep in mind when changing the travel on your Fox Factory dropper post: * Use a clean and well-lubricated work area to prevent any damage to the post or its components. * Make sure to tighten all bolts and screws securely to prevent any shifting or movement during riding. * Test the post before putting it back on the bike to make sure it’s working smoothly and correctly. * Consider using a torque wrench to ensure that all bolts and screws are tightened to the correct specification.

Important Considerations

Before making any adjustments to your Fox Factory dropper post, keep the following considerations in mind: * Check the manufacturer’s instructions for specific guidance on travel adjustment and any other maintenance or repair procedures. * Make sure you have the correct tools and materials before starting the job to avoid any delays or complications. * Be careful not to damage any components during the adjustment process, as this can lead to costly repairs or replacement.

🚨 Note: Always follow proper safety procedures when working with bike components, and consult a professional mechanic if you're unsure about any aspect of the process.

Table of Travel Adjustment Options

The following table outlines the available travel adjustment options for the Fox Factory dropper post:

Travel Option	Spacer Configuration
100mm	2 x 10mm spacers
125mm	1 x 10mm spacer + 1 x 15mm spacer
150mm	2 x 15mm spacers

In the end, changing the travel on your Fox Factory dropper post is a relatively straightforward process that can be completed with the right tools and a bit of patience. By following the steps outlined in this guide and taking the necessary precautions, you can customize your post to suit your specific needs and take your riding to the next level.